smartphoton et usb pylontech

[Laurentcls]

Voila une copie du port USB0 si ça aide


ttyUSB0
/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0

Sous-système: tty
Chemin d’accès au périphérique:
/dev/ttyUSB0
ID:
/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0


Atributs:

DEVLINKS: >-
/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
/dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.4:1.0-port0
/dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usbv2-0:1.4:1.0-port0
DEVNAME: /dev/ttyUSB0
DEVPATH: >-
/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/ttyUSB0/tty/ttyUSB0
ID_BUS: usb
ID_MODEL: USB-Serial_Controller
ID_MODEL_ENC: USB-Serial\x20Controller
ID_MODEL_ID: '2303'
ID_PATH: platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.4:1.0
ID_PATH_TAG: platform-fd500000_pcie-pci-0000_01_00_0-usb-0_1_4_1_0
ID_PATH_WITH_USB_REVISION: platform-fd500000.pcie-pci-0000:01:00.0-usbv2-0:1.4:1.0
ID_REVISION: '0300'
ID_SERIAL: Prolific_Technology_Inc._USB-Serial_Controller
ID_TYPE: generic
ID_USB_DRIVER: pl2303
ID_USB_INTERFACES: ':ff0000:'
ID_USB_INTERFACE_NUM: '00'
ID_USB_MODEL: USB-Serial_Controller
ID_USB_MODEL_ENC: USB-Serial\x20Controller
ID_USB_MODEL_ID: '2303'
ID_USB_REVISION: '0300'
ID_USB_SERIAL: Prolific_Technology_Inc._USB-Serial_Controller
ID_USB_TYPE: generic
ID_USB_VENDOR: Prolific_Technology_Inc.
ID_USB_VENDOR_ENC: Prolific\x20Technology\x20Inc.
ID_USB_VENDOR_ID: 067b
ID_VENDOR: Prolific_Technology_Inc.
ID_VENDOR_ENC: Prolific\x20Technology\x20Inc.
ID_VENDOR_ID: 067b
MAJOR: '188'
MINOR: '0'
SUBSYSTEM: tty
TAGS: ':systemd:'
USEC_INITIALIZED: '4320128'

---

La syntaxe fournie ne fonctionne pas